Panache Industries is accredited as a manufacturer, exporter, and supplier of Inconel 600 Round Bars & Wires. These are offered in different grades, finishes, standards, specifications and custom dimensions. Moreover, customers modify them as per their application requirements. These are utilized extensively over the manufacturing industry and for architectural applications.
Inconel 600 Round Bars & Wires is a nickel, iron, chromium solid solution strengthened bars and wires. It has higher corrosion and high-temperature resistance. It offers service in temperatures at the cryogenic temperatures up to 2000 degree F. mainly these are used in chemical and paper processing industries. These are also utilized in heat treating industries.
Fabrication/ heat treatment:
Inconel 600 Round Bars & Wires are both hot and cold formed. These are hot formed between 1600 degree F to 2250 degree F. the ductility decreases in the temperature range up to 1200 to 1600 degree F. it has higher cold work hardening rates than conventional grades. The best welding results are achieved by SMA welding process. The annealing process of alloy 600 without excessive grain growth, the fine structure has better corrosion resistance as well as tensile strength, impact and fatigue properties.
It has the nickel content that makes it resistive to many organic and inorganic compounds. It also provides good resistance in reducing environments. Another benefit because of its nickel content it has a lower impact of stress corrosion cracking while annealing. The chromium composition makes it able to withstand in higher temperatures even the environments that contain oxidizing compounds at hoists temperatures. Moreover, it has excellent resistance to the high concentration in alkaline solutions, due to manganese content.
Inconel 600 Wire Rod, Inconel Wire, Inconel 600 Spring Wire, Inconel 600 Fine Wires, Inconel 600 Coarse Wires, Inconel DIN 2.4816 Welding Rod / Welding Wire, Inconel 600 Flux Cored Wires, Inconel 600 Filler Wires, Inconel Alloy 600 Filler Wires, Inconel Alloy 600 Wires.
Inconel Alloy 600 Round Bars, Inconel Alloy 600 Round Bar and Rod, Inconel Alloy 600 Threaded Bar, Inconel Alloy 600 Forged Round Bar, Inconel Alloy UNS N06600 Bright Bar, Inconel Alloy 600 Round Bars, Inconel Alloy 600 Round Rod, Inconel Alloy 600 Welding Rod, 600 Inconel Round Bar.
Superiority of products:
We assure fabricated Inconel 600 Round Bars & Wires are taken in course of strict quality tests that ensure the durability of products in adverse environments. The tests are conducted in two-stage impact and material test. The impact tests are Crushing/ buckling test, destructive/non-destructive test, mechanical test, hardness test, and tensile test. Material tests are the positive material test, micro, and macro test, chemical test, intergranular corrosion test, ultrasonic test, radiographic test, and pitting corrosion test.
Specification : ASTM B166 / ASME SB166
Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Length : 100 mm To 3000 mm Long & Above
Size : 5 mm To 500 mm
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
Condition : Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished
Specifications : ASTM B166 ASME SB166
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter Range : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire
|Inconel 600||N06600||2.4816||NC15FE11M||МНЖМц 28-2,5-1,5||ЭИ868||NA 13||NCF 600||NiCr15Fe|
|0.15 max||14.0 – 17.0||6.0 – 10.0||0.015 max||72.0 min||1.0 max||0.5 max||0.5 max|
|Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|8.0 g/cm3||1413 °C (2580 °F)||Psi – 95,000 , MPa – 655||Psi – 45,000 , MPa – 310||40 %|
inconel alloy 600 cold finish round bar, inconel alloy 600 round bar and wire distributors, inconel 600 square bar, A Wide Range Of the Best Quality inconel alloy 600 forged round bars manufacturers in india, inconel 600 wire manufacturer in delhi, inconel 2.4816 round bar, inconel 600 round bars and wires manufacturers, inconel alloy 600 welding rod / welding wire manufacturers, inconel alloy 600 square bar manufacturing process, inconel uns N06600 filler wires, inconel 2.4816 wire bobbin, inconel uns N06600 round bar, inconel 600 rods suppliers, inconel 600 wire price per kg, inconel alloy 600 round rods, inconel alloy 600 wires manufacturers, inconel 600 wire Dealers, inconel 600 filler wire, 600 inconel Alloy bright bar, inconel 600 welding wire manufacturers in mumbai, inconel 600 wires manufacturer in mumbai, inconel 600 rectangular bar stockholder.
Types of Packaging:
– Bundles (hexagonal)
– Wooden Boxes
– Crates (steel/wooden)
– Packaging for Inconel Alloy 600 Round Rod as per customer’s requirements
– High Strength
– Resistant High Mechanical Stresses
– Resistant to High Temperature
– Good Formality
If you’re looking for a trusted and reliable supplier of Inconel 600 Round Bar and Wires then contact Shop no. 8B, Jai Siddhivinayak CHS., Ardeshir Dadi X Street, Mumbai - 400 004